SMACO                               Specialist to the Rubber Industry
    Sivon Manufacturing Company
          3131 Perry Park Rd. - Perry, Ohio 44081     Phone: (440) 259-5505     Fax: (440) 259-4602

Home

Location

About Us!

Information


SMACO Rubber Cutters

   Pivot Cutter

The pivot cutters are very popular cutters, as they use the same design blade as the cantilever cutter, but are small and easy to set up in various areas of the plant. The standard cutter blade is 3" long x 1 1/2" deep. It is also available in 6" and 10" lengths.
   Cantilever Cutter

The SMACO Rubber Cutters are used for cutting rubber gasket stock. The blades are double beveled; making a straight-sided cut on irregular shapes and gives a good clean cut you need for good clean splices. The standard 13 and 20 inch cantilever cutters are available with a 1" or 2" vertical opening. We have made special order cutters using a blade up to 40 inches long.
   Air Cutter
The SMACO air cutter uses a 6" wide blade, 2" deep and rides up and down on 2 posts. The standard size uses a 3" diameter cylinder for up to 250 psi. There is approximately 700 lbs. Pressure applied with 100 psi air pressure. A foot valve operates it. Bench space needed is 5" x 12". A guard is supplied. As with any of the cutters, it is up to the customer to guard according to their safety needs.

ALL CUTTERS MUST BE FIRMLY MOUNTED ON A BENCH
AND GUARDED BEFORE OPERATING.

         

 

 

   Copyright 2002 - Sivon Manufacturing Company, Inc.
   Please send comments or questions about this site by clicking this link 
   Last Updated 12/13/2006 04:33 PM